Brief:An expander flange is a crucial component in various industrial piping systems. It is designed to connect different sections of pipes, allowing for expansion and contraction caused by temperature changes. This is essential as temperature fluctuations can cause pipes to expand or contract, and without proper accommodation, it could lead to stress, leaks, or even structural damage.
Brief:17-4 stainless steel( 630 ) is a chromium-copper precipitation hardening stainless steel material used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius).
Brief:Type 431 is a hardenable martensitic stainless steel alloy which combines high tensile strength and torsional strength. The material is well suited to shaft manufacture due to these characteristics.
Brief:4Cr13 steel (New name: 40Cr13) is a martensitic type stainless steel, which has higher hardness than 3Cr13 steel after quenching. The steel has good mechanical processing performance. After heat treatment (quenching and tempering), it has good corrosion resistance, polishing performance, high strength and wear resistance.
Brief:Chinese 30Cr13 (3Cr13 steel) is a martensitic stainless steel, this steel has good mechanical processing performance. After heat treatment (quenching and tempering), it has excellent corrosion resistance and high polishing strength and wear resistance.
Brief:Chinese 2Cr13 steel (20Cr13) is a martensitic stainless steel with magnetic properties, good corrosion resistance and high hardness in the quenched state. 2Cr13 stainless steel is used in a wide range of applications, such as cutting tools, surgical tools, and steam turbine blades, material density is 7.75g/cm3, 2Cr13 is an old representation, the new representation is 20Cr13.
Brief:Stainless Steel Round Bar 2205 is a round shaped 2205 Stainless Steel Alloy bar. 2205 Stainless Steel Alloy is also know as a Duplex stainless steel is an extremely corrosion resistant, work hardenable alloy.
Brief:Alloy SAF 2507 is a super duplex stainless steel comprised of 25% chromium, 4% molybdenum and 7% nickel. It has been crafted specifically to be used in situations that require exceptional strength and resistance to corrosion including use in seawater equipment, chemical processing and petrochemical.
Brief:904L is an austenitic stainless steel. Though notably softer than 316L, its molybdenum addition gives it superior resistance to localized attack (pitting and crevice corrosion) by chlorides and greater resistance reducing acids and in particular its copper addition gives it useful corrosion resistance to all concentrations of sulphuric acid.
Brief:9Cr18Mo steel is China GB standard martensitic stainless steel. Equals 102Cr17Mo. After quenching, it has high hardness and wear resistance and high dimensional stability. The properties and uses of 9Cr18Mo are basically the same as those of 9Cr18 steel. But after quenching, it has higher hardness and anti-tempering stability. Molybdenum can increase the passivation effect of stainless steel.
Brief:9Cr18 steel is a high-carbon high-chromium martensitic stainless steel, after quenching with high hardness, high wear resistance and corrosion resistance. The steel is suitable for the manufacture of plastic molds that withstand high wear, high loads and corrosive media. The steel belongs to Lai Steel's body, easy to form uneven carbide segregation and affect the service life of the mold, so the thermal processing must be strictly controlled thermal processing, pay attention to the appropriate processing ratio.
