Brief:9Cr18MoV is a type of high-carbon stainless steel that is commonly used in the manufacturing of knives. It is a Chinese-made steel that is known for its excellent corrosion resistance, as well as its overall durability and toughness.
Brief:EN 1.4301 grade 304 Stainless Steel 18/8 (18% chromium 8% nickel) is the most widely used of all Stainless Steel types. Due to its composition, corrosion and heat resistance and its mechanical properties, grade 304 is used in all fields of industrial, commercial and domestic manufacturing.
Brief:316L stainless steel is easily identified by examining its carbon content - which should be lower than that of 316. Beyond that, here are some 316L properties that also distinguish it from other steel grades.
Brief:Grades 321 and 347 are the basic austenitic 18/8 steel (Grade 304) stabilized by Titanium (321) or Niobium (347) additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850 °C. Grade 321 is the grade of choice for applications in the temperature range of up to about 900 °C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
Brief:Stainless steel type 1.4305 is popularly known as grade 303 stainless steel. Grade 303 stainless steel is the most readily machineable of all the austenitic grades of stainless steel.
Brief:Grade 310 is a medium carbon austenitic stainless steel, for high temperature applications such as furnace parts and heat treatment equipment. It is used at temperatures up to 1150°C in continuous service, and 1035°C in intermittent service. Grade 310S is a low carbon version of grade 310.
Brief:Alloy 317 and 317L are molybdenum-bearing austenitic stainless steels. Due to the molybdenum content of 3-4% 317 and 317L are more resistant to general corrosion and pitting/crevice corrosion than type 304. 317 and 317L are used in the Food, Pharmaceutical, Marine and Architecture industries.
Brief:By adopting the combined chemical composition design of low carbon,low sulfur, low phosphorous and micro-alloy, by applying the offline quenching and other advanced automation technologies, our wear resistant(Abrasion Resisant) plate are popular at home and abroad.
Brief:This data sheet applies to stainless steel 347 / 1.4550 hot and cold rolled sheet, strip and bars, semi-finished products, rods and sections as well as for seamless and welded steel tubes for mechanical and general engineering purposes.
Brief:201 stainless steel, with certain acid and alkali resistance, high density, no bubbles, no pinholes, etc. It is a high-quality material for producing various case and strap bottom cover. Mainly used for decorative tubes, industrial tubes, some shallow stretched products.
Brief:40CrNiMoA alloy structural steel is made of high-quality carbon structural steel by adding one or several alloying elements (total content not exceeding 5%). Common quality defects of bearing parts after heat treatment include: quenching microstructure overheating, underheating, quenching cracks, insufficient hardness, heat treatment deformation, surface decarburization, soft spots, etc.
