Brief:Nickel alloy rod is a kind of high-performance material, known for its corrosion resistance, high temperature strength and excellent mechanical properties, and is widely used in aviation, energy, chemical industry and other fields. Nickel alloy bars have good corrosion resistance, especially in the chemical industry, Marine engineering and other fields, can resist a variety of corrosive media, maintain the stability of the material, maintain excellent mechanical properties in high temperature environment, suitable for aviation, energy and other fields, can maintain the strength and stability of the material under extreme conditions. In addition to corrosion resistance and high temperature strength, nickel-based alloy bars also have excellent mechanical properties, suitable for mechanical manufacturing, automobile manufacturing and other fields. The production process of nickel alloy bars usually includes smelting, casting, hot rolling and cold drawing to ensure the accuracy and purity of the alloy composition, as well as the quality and performance of the final product. With the development of science and technology and industry, its application field is still expanding.
Brief:31CrMoV9 is a steel which in general is intended for the fabrication of quenched and tempered parts, which are generally machined and subsequently nitrided.
Brief:It is mainly used for nitrided parts with precise dimensions after heat treatment, or various nitrided parts with low impact load and high wear resistance. Such as boring bar, grinding machine spindle, automatic lathe spindle, worm, precision screw, precision gear. And also such as High-pressure valves, valve stems, gauges, templates, rollers, replicas, cylinder blocks, compressor piston rods, governors on steam turbines, rotating sleeves, fixing sleeves, various wear-resistant parts on rubber and plastic extruders, etc.
Brief:16MnCr5 grade steel is a case hardening steel used extensively for both carburising and carbonitriding, demonstrating reasonably high hardenability and excellent forgeability.
Brief:40CrNiMoA alloy structural steel is made of high-quality carbon structural steel by adding one or several alloying elements (total content not exceeding 5%). Common quality defects of bearing parts after heat treatment include: quenching microstructure overheating, underheating, quenching cracks, insufficient hardness, heat treatment deformation, surface decarburization, soft spots, etc.
Brief:19CN5 is the introduction of foreign Cr-Ni series of steel, is the transmission of important surface hardening steel. 19CN5 has a higher strength and toughness, better machinability and forging, rolling hot workability, the relative thermal deformation smaller, but poor weldability and corrosion resistance.
Brief:1045 refers to the medium carbon quenched and tempered structure Steel. The cold plasticity of this steel is average, and annealing and normalizing are slightly better than quenching and tempering. It has high strength and good machinability. After appropriate heat treatment, it can obtain a certain degree of toughness, plasticity, and wear resistance
Brief:High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
Brief:20MnCr5 is a case-hardening steel with low carbon content but good hardenability reaching good wear resistance due to high surface hardness after hardening. The small grain size benefits in good ductility and fatigue strength.
Brief:17-4 stainless steel( 630 ) is a chromium-copper precipitation hardening stainless steel material used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius).
Brief:Stainless Steel Round Bar 2205 is a round shaped 2205 Stainless Steel Alloy bar. 2205 Stainless Steel Alloy is also know as a Duplex stainless steel is an extremely corrosion resistant, work hardenable alloy.
Brief:Alloy 317 and 317L are molybdenum-bearing austenitic stainless steels. Due to the molybdenum content of 3-4% 317 and 317L are more resistant to general corrosion and pitting/crevice corrosion than type 304. 317 and 317L are used in the Food, Pharmaceutical, Marine and Architecture industries.
