Availability: | |
---|---|
1Cr17Ni2 Range of products
Product type | Products | Dimension | Processes | Deliver Status |
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Chemical composition(mass fraction)(wt.%) of the 1Cr17Ni2
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
C | 0.11 | 0.17 | ||
Si | - | 0.80 | ||
Mn | - | 0.80 | ||
P | - | 0.035 | ||
S | - | 0.030 | ||
Ni | 1.50 | 2.50 | ||
Cr | 16.00 | 18.00 |
Mechanical properties of grade 1Cr17Ni2
Yield | Tensile | Impact | Elongation | Reduction in cross section on fracture | As-Heat-Treated Condition | HBW |
954 (≥) | 985 (≥) | 22 | 31 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
Physical properties of grade 1Cr17Ni2
Property | Density | Temperature T | Specific heat | Thermal conductivity | Electric resistance |
975 (≥) | 294 (≥) | 23 | 42 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
Temp. | Creep strain limit | Creep rupture strength | - | - | - |
442 | 148 | 442 | - | - | - |
Size Availability
Steel Grade | Specification | Processing range(mm) |
1Cr17Ni2 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
Square and Flat Steel | Φ10 to Φ100 | |
Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
Coil and Strip Steel | THK:0.1mm Width:1500mm | |
Forged | Ring/Cylindrical/Disk |
Our Services
We can cut and bend steel plate according to customer's requriement or drawing,
packaging according to customers' request.
Application
By adopting the combined chemical composition design of low carbon,low sulfur, low phosphorous and micro-alloy, by applying the offline quenching and other advanced automation technologies, our wear resistant(Abrasion Resisant) plate are popular at home and abroad. Mainly used for thermal Power plant, Coal Mines, Cement Mills, Loading Machinery, Mining Machinery,Project Machinery.Metallurgical Machinery, Wear resistant plate also can be applied in Sand Mill Cylindrical Shell, Vane, Mechanical Parts used in yard and port, Bearing Structure Parts etc.
1Cr17Ni2 Range of products
Product type | Products | Dimension | Processes | Deliver Status |
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Chemical composition(mass fraction)(wt.%) of the 1Cr17Ni2
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
C | 0.11 | 0.17 | ||
Si | - | 0.80 | ||
Mn | - | 0.80 | ||
P | - | 0.035 | ||
S | - | 0.030 | ||
Ni | 1.50 | 2.50 | ||
Cr | 16.00 | 18.00 |
Mechanical properties of grade 1Cr17Ni2
Yield | Tensile | Impact | Elongation | Reduction in cross section on fracture | As-Heat-Treated Condition | HBW |
954 (≥) | 985 (≥) | 22 | 31 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
Physical properties of grade 1Cr17Ni2
Property | Density | Temperature T | Specific heat | Thermal conductivity | Electric resistance |
975 (≥) | 294 (≥) | 23 | 42 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
Temp. | Creep strain limit | Creep rupture strength | - | - | - |
442 | 148 | 442 | - | - | - |
Size Availability
Steel Grade | Specification | Processing range(mm) |
1Cr17Ni2 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
Square and Flat Steel | Φ10 to Φ100 | |
Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
Coil and Strip Steel | THK:0.1mm Width:1500mm | |
Forged | Ring/Cylindrical/Disk |
Our Services
We can cut and bend steel plate according to customer's requriement or drawing,
packaging according to customers' request.
Application
By adopting the combined chemical composition design of low carbon,low sulfur, low phosphorous and micro-alloy, by applying the offline quenching and other advanced automation technologies, our wear resistant(Abrasion Resisant) plate are popular at home and abroad. Mainly used for thermal Power plant, Coal Mines, Cement Mills, Loading Machinery, Mining Machinery,Project Machinery.Metallurgical Machinery, Wear resistant plate also can be applied in Sand Mill Cylindrical Shell, Vane, Mechanical Parts used in yard and port, Bearing Structure Parts etc.