Nickel Pipe from China manufacturer - JIANGSU BEALLOY CO.,LTD

Standard Specification

Grade	UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201)
Specification	IS, BS, ASTM
Type	Seamless Weled

Alloy 200 Equivalent Grades

Standard	Nickel 200
UNS	N02200
Werkstoff Nr.	2.4066

Alloy 201 Equivalent Grades

Standard	Nickel 201
UNS	N02201
Werkstoff Nr.	2.4068

Chemical Composition of Nickel Alloy 200

	Nickel 200
Ni	99.0 min
Fe	0.4 max
C	0.15 max
Mn	0.35 max
Si	0.1 max
Cu	0.25 max
Mg
Ti
S	0.01 max

Chemical Composition of Nickel Alloy 201

	Nickel 201
Ni	99.0 min
Fe	0.4 max
C	0.02 max
Mn	0.35 max
Si	0.2 max
Cu	0.25 max
Mg	0.15 max
Ti	0.1 max
S	0.01 max

UNS N02200 Mechanical Properties

Density	8.9 g/cm3
Melting Point	1446 °C (2635 °F)
Tensile Strength	Psi – 67000, MPa – 462
Yield Strength (0.2%Offset)	Psi – 21500, MPa – 148
Elongation	45 %

UNS N02201 Mechanical Properties

Density	8.9 g/cm3
Melting Point	1446 °C (2635 °F)
Tensile Strength	Psi – 67000, MPa – 462
Yield Strength (0.2%Offset)	Psi – 21500, MPa – 148
Elongation	45 %

Seamless Stainless Steel Pipe

Standards: ASTM A312
Sizes: 1/4″ Thru 20”

Schedules: 10s, 40s, 80s, 160, and XXH

True 40, True 80

Welded stainless steel pipe
Standards: ASTM A312
Sizes: 1/4″ Thru 36″
Schedules: 10s, 20, 40s, 80s

Equipment:

NB	Size	OD mm	40S mm	5S mm	10S mm	S 10 mm	S 20 mm	S 40 mm	S 60 mm	XS/80S mm	S 80 mm	S 100 mm	S 120 mm	S 140 mm	S 160 mm	XXS mm
	1/8”	10.29			1.24			1.73			2.41
	1/4”	13.72			1.65			2.24			3.02
	3/8”	17.15			1.65			2.31			3.20
15	1/2”	21.34	2.77	1.65	2.11			2.77		3.73	3.73				4.78	7.47
20	3/4”	26.67	2.87	1.65	2.11			2.87		3.91	3.91				5.56	7.82
25	1”	33.40	3.38	1.65	2.77			3.38		4.55	4.55				6.35	9.09
32	1 1/4”	42.16	3.56	1.65	2.77			3.56		4.85	4.85				6.35	9.70
40	1 1/2”	48.26	3.68	1.65	2.77			3.68		5.08	5.08				7.14	10.15
50	2”	60.33	3.91	1.65	2.77			3.91		5.54	5.54				9.74	11.07
65	2 1/2”	73.03	5.16	2.11	3.05			5.16		7.01	7.01				9.53	14.02
80	3”	88.90	5.49	2.11	3.05			5.49		7.62	7.62				11.13	15.24
90	3 1/2”	101.60	5.74	2.11	3.05			5.74		8.08	8.08
100	4”	114.30	6.02	2.11	3.05			6.02		8.56	8.56		11.12		13.49	17.12
125	5”	141.30	6.55	2.77	3.40			6.55		9.53	9.53		12.70		15.88	19.05
150	6”	168.27	7.11	2.77	3.40			7.11		10.97	10.97		14.27		18.26	21.95
200	8”	219.08	8.18	2.77	3.76		6.35	8.18	10.31	12.70	12.70	15.09	19.26	20.62	23.01	22.23
250	10”	273.05	9.27	3.40	4.19		6.35	9.27	12.70	12.70	15.09	19.26	21.44	25.40	28.58	25.40
300	12”	323.85	9.53	3.96	4.57		6.35	10.31	14.27	12.70	17.48	21.44	25.40	28.58	33.32	25.40
350	14”	355.60	9.53	3.96	4.78	6.35	7.92	11.13	15.09	12.70	19.05	23.83	27.79	31.75	35.71
400	16”	406.40	9.53	4.19	4.78	6.35	7.92	12.70	16.66	12.70	21.44	26.19	30.96	36.53	40.49
450	18”	457.20	9.53	4.19	4.78	6.35	7.92	14.27	19.05	12.70	23.83	29.36	34.93	39.67	45.24
500	20”	508.00	9.53	4.78	5.54	6.35	9.53	15.09	20.62	12.70	26.19	32.54	38.10	44.45	50.01
550	22”	558.80	9.53	4.78	5.54	6.35	9.53		22.23	12.70	28.58	34.93	41.28	47.63	53.98
600	24”	609.60	9.53	5.54	6.35	6.35	9.53	17.48	24.61	12.70	30.96	38.89	46.02	52.37	59.54
650	26”	660.40	9.53			7.92	12.70			12.70
700	28”	711.20	9.53			7.92	12.70			12.70
750	30”	762.00	9.53	6.35	7.92	7.92	12.70			12.70
800	32”	812.80	9.53			7.92	12.70	17.48		12.70
850	34”	863.60	9.53			7.92	12.70	17.48		12.70
900	36”	914.40	9.53			7.92	12.70	19.05		12.70

Chemical Composition

Grades	C max	Mn max	P max	S max	Si max	Cr	Ni	Mo
304	0.08	2.00	0.04	0.03	0.075	18.00-20.00	8.00-11.00	/
304L	0.035	2.00	0.04	0.03	0.075	18.00-20.00	8.00-13.00	/
316	0.08	2.00	0.04	0.03	0.075	16.00-18.00	11.00-14.00	2.00-3.00
316L	0.035	2.00	0.04	0.03	0.075	16.00-18.00	10.00-15.00	2.00-3.00

Mechanical Properties

Grades	Itemper	Tensile Psi	Yield Psi	Elong %	Rockwell Hardness
304	Annealed	85000-105000	35000-75000	20-55	80-95
304L	Annealed I1/8 Hard	80000-105000	30000-75000	20-55	75-95
316	Annealed	85000 min	35000 min	50 min	80 min
	Annealed	80000 min	30000 min	50 min	75 min

Annealed, Pickling, Polished

Product Category

Nickel Pipe

JIANGSU BEALLOY CO.,LTD.

SUBSCRIBE TO OUR PRICE LIST

CONTACT US

Availability:



Inquire